KEL-T: Electric tilting steam kettle

50 PSI STEAM JACKET RATING (3.5 Bar) 2/3 STEAM JACKETED, 25, 40 or 60 GALLONS (100, 150 or 225 LITERS)

CLEVELAND, Electric Kettle, Tri-leg mounted, self-contained, tilting, 2/3 Steam Jacketed. Type 304 Stainless Steel Kettle and Supports. 50 psi Steam Jacket Rating, 50 psi Safety Valve (3.5 Bar Boiling Pan), Permanently filled Steam Jacket, Combination Pressure/Vacuum Jacket Gauge. Splash Proof Solid State Temperature (±1° C) and Safety Control System in plug-in Module including L.E.D. indicators, Optional 2" (50 mm) Tangent Draw Off and Spring Assist Cover

Features
Accessories
Videos
Downloads

Water Resistant Controls
Splash-proof construction

Pouring Lip
Large pouring lip for high capacity and chunky products.

Rolled Rim
Re-inforced rolled rim design prevents damage to kettle rim, eliminates "bar rim designs"

Heating Elements
Welded-in heating elements, (holds vacuum better, won't leak or loose water)

Easily Cleaned
Kettle and all exterior surfaces are of type 304 stainless steel with an #4 finish

Pressure Gauge
Rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. Color coded easy to read pressure gauge with "green" and "vent air zone"

Jacket Rating
50 psi steam jacket rating for higher cooking temperatures

Safety Valve
50 psi

Water Level Control
Solid state water level control (no sight glass gauge to break or leak)

Element Cover
Splash proof element cover with a double gasket seal

Standard voltage
208-240 volts, 60 Hz, 3 phase, 3 wire. Model KET-6 and KET-12 are field rewirable to single phase

State of the Art Controls
Accurate, consistant solid state temperature controls (mechanical thermostate not as accurate) - less than ±1°C variance (ideal for simmering). Operating temperature range from 145° - 260°F (63°C - 127°C) Control panel includes:LED indicator for heat cycle, LED indicator for low water Power ON/OFF switch, Adjustable temperature control dial

Self Contained Electric Steam Source
Electricial connection and option water connections

50 PSI Steam Jacket Rating (3.5 Bar) for High Speed Cooking
Steam jacket filled with treated water, venting and/or refilling is not required

Tilt Mechanism
Tilt mechanism of roller bearings and case hardened self-locking worm and segment gear

Legs
1 5/8" O.D. tri-leg supports with level adjustable feet for floor bolting

Shipping Weights, KW's, Dims (W x D X H)
KEL25T 290 lbs (132 kgs) 9.8 kW, 37" (759mm) x 34" (556mm) x 31" (788mm)KEL40T 360 lbs (163 kgs) 14.7 kW, 42" (1055mm) x 37" (943mm) x 38" (959mm)KEL60T 415 lbs (188 kgs) 14.7 kW, 45" (1143mm) x 38" (975mm) x 41" (1045mm)

	316 Kettle Liner 316 Stainless Steel kettle liner for high acid food products (316-G)
	Cooking Baskets (BS)
	Cover Domed - CHS Spring-assisted, hinged, rotatable, domed Stainless Steel Cover (CHS)
	Electrical High wattages (HW) and special voltages
	Faucet Hot and cold (DPK) or cold only (SPK) water faucet with swing spout. Requires mounting bracket (FBKT)
	Food Strainers (FS)
	Kettle Accessory Kit (KAK) Clean-up Brush (CB), 36" Kettle Paddle (KP)36" Kettle Whip (KW), 36" Kettle Brush (KB)Draw-off Brush (DB), 24 oz. Ladle (KL)
	Kettle Markings (KM)
	Measuring Strips (MS)
	Spray Hose (PRS-K)