KEL-T: Electric steam kettles, quad leg, tilting

50 PSI STEAM JACKET RATING (3.5 Bar Boiling Pan) SELF-CONTAINED, 2/3 STEAM JACKETED, 80 - 100 GALLONS

CLEVELAND, Electric Kettle, Quad-leg mounted, self-contained, tilting, 2/3 Steam Jacketed. Type 304 Stainless Steel Kettle and Supports. 50 psi Steam Jacket Rating (3.5 Bar); 50 psi Safety Valve; Permanently filled Steam Jacket; Combination Pressure/Vacuum Jacket Gauge. Splash Proof Solid State Temperature (±1° C) and Safety Control System in plug-in Module including L.E.D. indicators,in plug-in Module including L.E.D. indicators. Optional 2" (50 mm) Tangent Draw-Off and Spring Assist Cover.

Features
Accessories
Videos
Downloads

Water Resistant Controls
Splash-proof construction

Pouring Lip
Large pouring lip for high capacity and chunky products.

Rolled Rim
Re-inforced rolled rim design prevents damage to kettle rim, eliminates "bar rim designs"

Heating Elements
Welded-in heating elements, (holds vacuum better, won't leak or loose water)

Easily Cleaned
Kettle and all exterior surfaces are of type 304 stainless steel with an #4 finish

Pressure Gauge
Rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. Color coded easy to read pressure gauge with "green" and "vent air zone"

Jacket Rating
50 psi steam jacket rating for higher cooking temperatures

Safety Valve
50 psi

Water Level Control
Solid state water level control (no sight glass gauge to break or leak)

Element Cover
Splash proof element cover with a double gasket seal

Standard voltage
208-240 volts, 60 Hz, 3 phase, 3 wire. Model KET-6 and KET-12 are field rewirable to single phase

State of the Art Controls
Accurate, consistant solid state temperature controls (mechanical thermostate not as accurate) - less than ±1°C variance (ideal for simmering). Operating temperature range from 145° - 260°F (63°C - 127°C) Control panel includes:LED indicator for heat cycle, LED indicator for low water Power ON/OFF switch, Adjustable temperature control dial

Legs
1 5/8" O.D. quad-leg supports with level adjustable feet for floor bolting

Tilt Mechanism
Tilt mechanism of roller bearings and case hardened self-locking worm and segment gear

50 PSI Steam Jacket Rating (3.5 Bar Boiling Pan) for Faster Cooking
Steam jacket filled with treated water, venting and/or refilling is not required

Shipping Weights, KW's, Dims. (W x D X H)
KEL80T 470 lbs (213 kgs) 14.7 kW, 49" (1232mm) x 42" (1055mm) x 44" (1105mm)KEL100T 520 lbs (235 kgs) 14.7 kW, 51" (1296mm) x 44" (1033mm) x 45" (1144mm)

	316 Kettle Liner 316 Stainless Steel kettle liner for high acid food products (316-G)
	Cooking Baskets (BS)
	Cover Domed - CHS Spring-assisted, hinged, rotatable, domed Stainless Steel Cover (CHS)
	Electrical High wattages (HW) and special voltages
	Faucet Hot and cold (DPK) or cold only (SPK) water faucet with swing spout. Requires mounting bracket (FBKT)
	Food Strainers (FS)
	Kettle Accessory Kit (KAK) Clean-up Brush (CB), 36" Kettle Paddle (KP)36" Kettle Whip (KW), 36" Kettle Brush (KB)Draw-off Brush (DB), 24 oz. Ladle (KL)
	Kettle Markings (KM)
	Measuring Strips (MS)
	Spray Hose (PRS-K)