| W x D x H |
62" x 50" x 82"
|
| Weight |
1700 lb
|
| Power Output | 15 Amps |
| Power Input Type | Electric |
| Primary Power Input | 208-240 V x 60 Hz x 3 PH |
HAMKDL-T: direct steam tilting mixer kettle, horizontal agitator
COOK CHILL, DIRECT STEAM, HORIZONTAL AGITATOR, TILTING MIXER KETTLES
CLEVELAND COOK CHILL HORIZONTAL TILTING MIXER KETTLE, leg mounted; 2/3 jacketed, direct steam;100 psi Steam Jacket Pressure Rating; 316 Stainless Steel Liner; electrically driven Horizontal Agitator; Variable Mixer Speed Control; Hydraulic Tilt Mechanism with kettle mounted power-pack; 3" diameter air operated, flush mounted Piston Draw-Off Valve; spring loaded Scraper Blades; flush mounted Temperature Probe; Automatic Water Meter; Water Fill Faucet with swing spout; Time/Temperature Chart Recorder (located in Control Center); Spring Assist, one piece Cover (bifold cover with counterweight for 300 gallon model).
|
Capacity
Full 60, 100, 150, 200 or 300 gallon working capacity |
|
Mixer
Variable mixer speed control |
|
Sraper Blades
Spring loaded blades scrape entire heated surface area |
|
Mixing Fins
Internal mixing fins for most efficient, uniform mixing, heating and cooling |
|
Simmer Control
For cooking delicate products |
|
Water Cooling
Spiral flights for even water cooling |
|
Agitator
Easily removable agitator without the use of tools |
|
Cover
Spring assist, one piece cover (bifold cover with counterweight for 300 gallon model) |
|
Rim Bar
Heavy duty rim bar |
|
Jacket Rating
100 psi steam jacket rating and safety valve |
|
Construction
Type 316 stainless steel for all food contact surfaces |
|
Faucet
Water fill faucet with swing spout |
|
Connection
Kettle mounted valve box for single point utility connections |
|
Note:
This cook/chill mixer kettle requires a control panel for operation which must be specified separately. |
|
Hydraulic Tilt Mechanism
With kettle mounted power-pack |
|
Draw-Off Valve
3" diameter air operated, flush mounted piston draw-off valve (requires air compressor) |
|
Temperature Sensor
Flush mounted, easily removable temperature sensor |
|
Mixer Arm
Electrically driven, tilting, horizontal agitator mixer arm |
|
Stop Button
Kettle mounted emergency stop button |
|
Agitator Interlock
Ceases the agitator rotation when the cover is lifted |
|
Approval
Approved for NSF/ANSI Standard 4 - Commercial Cooking |
|
ASME
Built to ASME Code - Section VIII - Division 1 |
|
USDA
Accepted for use in USDA inspected facilities |
|
Flow Diverter
No tool installation and removal |
Standard Features for Kettle Control Center
|
HA-MKDL-60-CC-T
60-gallon horizontal agitator tilting mixer kettle
HA-MKDL-100-CC-T
100-gallon horizontal agitator tilting mixer kettle
| W x D x H |
73" x 421/2" x 91"
|
| Weight |
2150 lb
|
| Power Output | 18 Amps |
| Primary Power Input | 208-240 V x 60 Hz x 3 PH |
HA-MKDL-200-CC-T
200-gallon horizontal agitator tilting mixer kettle
| W x D x H |
82" x 67" x 111"
|
| Weight |
2500 lb
|
| Power Output | 25 Amps |
| Primary Power Input | 208-240 V x 60 Hz x 3 PH |
Ball Valve3" flush mounted ball valve |
|
Control PanelsKettle mounted control center (100 gal. and larger) |
|
DollyFor horizontal agitator |
|
Food Strainer(FS) |
|
HoistElectric chain hoist for lifting the product loading |
|
Loading BucketAnd Dolly |
|
Agitator Idler BearingClean in place (CIP) agitator idler bearing with hot water/steam connector |
|
Water MeterFor hot and cold kettle fill |
|
Control CenterSingle or dual remote control center |
|
CoverStainless steel bifold hinged cover |
|
Elbow3", 90° elbow |
|
ApprovalCRN approval for Canada |
|
Electric Voltages208/3/60, 2403/60 and 460/3/60 |
|
Export Voltages380/3/50 or 575/3/60 |
